MegaVision E1-i
Skip to main content

MegaVision Imaging Products

E1-i

The E1-i digital camera/camera back is designed for flexible image capture in relatively low-light applications where it’s 2-megapixels enable rapid readout and high sensitivity.  It provides good dynamic range, live focus, electronic shuttering, and easy integration.  When interfaced with an appropriate host computer and coupled to an optional C-mount or F-mount lens adapter, the E1-i becomes a complete camera system.

Features

  • The E1-i comprises 1.92 megapixels in a 1600X1200 format and provides high sensitivity, low noise, electronic shuttering, and live focus over a FireWire interface.

  • Flexible trigger input and internal logic controllers facilitate interfacing to a wide range of host camera systems.  IEEE 1394 (FireWire) interface eliminates many support issues and eases integration  with host computer systems.

  • A replete SDK, which supports MegaVision’s entire line of digital backs, enables rapid integration with custom image capture applications.  The SDK enables image capture, calibration, and processing.

  • MegaVision’s calibrated color development enables custom renderings to achieve optimum diagnostic quality.

  • Raw files may be saved in industry standard DNG format, and developed images may be saved in either TIFF or JPG.

  • MegaVision can also provide with the E1-i its award winning PhotoShoot capture application as an aid to application development, or as a stand-alone capture, assessment, and management software in its own right.

 

E1-i Specifications

Sensor

 Interline transfer CCD

Pixel Size

7.4 µm square

Max Resolution

 1600 (H) x 1200 (V) --- 1.92 megapixels

Max Image Area

 13.38 mm (H) X 9.52 mm (V)      16.42 mm Diagonal

Size

 3.25” Wide X 4” long X 1.5” deep (8.3cm X 10.2cm  X 3.8 cm)

Note: Size does not include mating connectors and optics.

Weight

 14 oz.  (.4 Kg)

Environmental

 Operating: 0-30C non-condensing

Storage

 -10-50C non-condensing

Power

 Supplied through IEEE 1394 interface

 10-24 V DC Conforming to IEEE 1394 specification

 Nominal 4 watts, Max 6 Watts on read-down

Hardware Trigger input

 Input for trigger: 2-Pin Lemo Connector

Trigger on  Low transition (TTL logic level)

Integration controlled by duration of active trigger signal. 

Strobe Trigger output

 None standard, optional PC connector, Nikon type with screw threads

Indicators

 Single Green/Red LED

         Green

 Enabled and ready to capture

          Red

 Busy---not ready to capture

S/N

 64 dB at base gain 

ISO

100---400 at 1X Bin, 500-4,000 at 2X Bin

Live Focus

 Supported at all binning modes

Binning

 1X, 2X, 4X

Color

  Monochrome or RGB Bayer pattern

User controls

 All controls through software

Gain

 Software controlled preamp with 4X range

Read down time

 .25  seconds (includes transfer to host computer)

Bits per color(mono)/total

 ADC: 12/36   File: 16/48

File Sizes

       RAW (.DNG)

Monochrome/Bayer:  3.8 megabytes (uncompressed, unpacked)

Monochrome/Bayer:  <2 megabytes, (typical, lossless compression)

       TIFF (Uncompressed)

1.9 megabytes mono  / 5.76 megabytes color at 8 bits/color

3.8 megabytes mono / 11.52 megabytes color at 16 bits/color

       JPG

< 1 megabytes Mono / < 1.5 megabytes color visually lossless compression

Host Cameras

 Topcon NW6S, others on request

Connectivity

 IEEE 1394, 400 Mbit/second (FireWire)

Host computer requirements

Operating System

 Windows Vista, XP, or  2K :  Professional  recommended

Display

Recommended minimum: 1280X1024

Processor

Recommended minimum 1 GHz P4

Memory

Recommended minimum: 1 Gigabytes

Disk Drive

4 Gigabyte unused